LZ936D-FK Model Rough Terrain Forklift
Features:
1. All-wheel drive with good pass ability and off-road performance. There is no differential between the axles, and large-diameter wide-base off-road tires are used. The minimum ground clearance of the vehicle is over 300mm and the departure angle is over 30°.
2. Using an articulated frame. The swing angle of the frame is generally ±30°~40°, the steering system is simple, no expensive steering drive axle is needed, and a small turning radius can be achieved. The steering wheel is manipulated to make the frame swing horizontally, so that the forks are easy to align For small tonnage off-road forklifts, the integral frame can be used, and the single-axle drive and the drive axle have a differential lock.
3. All-wheel braking. In addition to the small tonnage forklifts that use the expansion shoe brake structure, most of them are caliper disc brakes, and some tonnage forklifts also use wet brakes. The parking brake is the most common with the independent hand brake.
4. For 2t~3t articulated off-road forklifts, the front and rear axles are common.
5. The rear axle of the axle off-road forklift is fixed to the frame, while the front axle can swing vertically ±8°~12° relative to the frame. A supporting hydraulic cylinder is arranged between the frame and the front axle. When the forklift is hoisting, the hoisting mast is kept in a sideways vertical state by manipulating the hydraulic cylinder; The collusion of the damping holes is beneficial to improve the ride comfort of the vehicle.
6. There is a larger wheelbase and wheelbase. Increase the forklift's directional and longitudinal stability.
7. Good mobility. The maximum speed is generally (30~40) km/h. The power factor is above 0.65, the driving acceleration is good, and it has a climbing ability of 25°~30°.
8. Larger gantry inclination. This is necessary for safe operation and driving on uneven ground, generally 10°~15° in the front and 15° in the rear.
9. The setting of the driver's seat. In order to ensure that the operator has a better field of vision when carrying out loading operations, the driver's seat is generally arranged in the front. For the articulated forklift, place it on the front frame as much as possible, and install a roof guard cab with FOPS/ROPS according to different operating requirements.
| Off Road Forklift Model | LZ936D-FK |
| Rated Load Capacity | 3000 kg |
| Net Weight | 3700 kg |
| Outside Dimension | 5300x1890x2660 mm |
| Wheel Tread | 1470 mm |
| Wheel Base | 2260 mm |
| Gantry Forward Inclination Angle | 12° |
| Gantry Reverse Inclination Angle | 6° |
| Shelf Length | 1220 mm |
| Lift Height | 4000 mm |
| Minimum Turning Radius | 4400 mm |
| Minimum Ground Clearance | 260 mm |
| Forwarder/ Reverse Speed | 5/8.5/18/27 km/h |
| Engine Brand | Quan Chai |
| Engine Model | 4BZ-52M22 |
| Rated Power | 36.8 kw |
| Rated Speed | 2400 r/min |
Lapuda Industry Equipment (Shandong) Co.,Ltd. is a company specializing in the production of construction machinery under Sadin Holdings. The factory is located in Weifang, a famous power city in China. The factory covers an area of 660,000 square meters and has a complete workshop for stamping, welding, forging, painting, assembling and testing. It is only 150 kilometers far away from Qingdao Port. International trade transportation is very convenient. After several years of development, the products produced by Lapuda Industry Equipment (Shandong) Co.,Ltd have covered five categories: mini excavator, loader, large excavator, backhoe loader, and forklift. Lapuda Industry Equipment (Shandong) Co.,Ltd and Shandong Sadin Heavy Industry Co.,Ltd together constitute the two core industries of Sadin Holding Group: construction machinery and agricultural equipment. We welcome distributors from all over the world to discuss cooperation matters with our group.
