After purchasing the machine, users should read the product introduction carefully and master the use rules. If necessary, you can participate in the corresponding agricultural machinery technical training to truly understand the principle and structure; Able to operate and maintain; It can be maintained and managed, so that it can be used easily and achieve the purpose of increasing production and income.
(1) Before use, you should first carefully read the product manual and relevant parts on the seeder, be aware of various performances of the corn seeder, and carry out specific operations according to the points in the manual to avoid machine failure. Before each operation, check whether the lubricating oil at the transmission part of the seeder is sufficient, whether the parts are connected tightly, whether the connecting bolts are fastened, and whether the rotating parts are flexible. If any abnormal sound is found during the seeding operation, it shall be stopped for inspection immediately to check the fault and carry out necessary maintenance.
(2) When sowing, the operator fills the sterilized corn seeds into the material compartment of the machine, loads the seeds to be sown into the vibrating material tray of the seeder, checks the water supply source, and checks the connection of the whole set of equipment. After confirmation, the control switch can be started for sowing. When sowing, it can be evenly sown into the soil at a certain depth through a series of operations such as trenching, seed metering, soil covering and compaction according to a certain row spacing.
(3) Strictly follow the requirements of the product manual and timely carry out mechanical maintenance.
"Prevention is more important than cure and maintenance is more important than repair" is a basic principle for the use and maintenance of seeders. The specific contents of the maintenance of the seeder include: checking and tightening the bolts connecting the relevant parts in daily work; Check whether the pins, cotter pins and other vulnerable parts of the seeder are damaged, and replace them if necessary; Check whether the connection of relevant parts of sowing is short of oil, and replenish it immediately if necessary; Check the appearance of the seeding machine and brush the paint if necessary to prevent rusting. Seeder is an important means of agricultural production and plays an important role in agricultural production in China. Through Mechanized Sowing operation, the sowing quality can be improved, the labor intensity of farmers can be reduced, the agricultural production efficiency can be improved, and the seeds can be saved. Especially in the drought and less rain, after the seeding operation, the advantages of mechanized seeding technology are further shown by its characteristics of strong moisture retention and good seedling emergence, which have a direct impact on the realization of agricultural yield and harvest and the increase of farmers' income.
