Machine information:
|
Machine Information |
|||
|
1 |
Overall Operating Weight |
8000KG |
|
|
2 |
L*W*H |
6230×2365×3752 |
|
|
3 |
Wheel Base |
2280mm |
|
|
4 |
Min. Ground Clearance |
300mm |
|
|
Load Main Technical Parameter |
|||
|
1 |
Bucket Capacity |
1.0m³ |
|
|
2 |
Breakout Force |
60KN |
|
|
3 |
Loading Lifting Capacity |
2500KG |
|
|
Digging Main Technical Parameters |
|||
|
1 |
Bucket Dumping Height |
2650mm |
|
|
2 |
Bucket Dumping Distance |
1025mm |
|
|
3 |
Digging Depth |
52mm |
|
|
4 |
Backhoe Capacity |
0.3 m3 |
|
|
5 |
Max. Digging Depth |
4082mm |
|
|
6 |
Swing Angle of Excavator Grab |
190o |
|
|
7 |
Max. Pulling Force |
65KN |
|
|
Engine |
|||
|
1 |
Model |
WEICHAI WP4G95E221 |
|
|
2 |
Type |
In Line Direct injection Four-Stroke and Injection |
|
|
3 |
Cylinder-Inside Diameter*Stroke |
4-105×130 |
|
|
4 |
Rated Power |
70KW |
|
|
5 |
Rated Speed |
2200r/min |
|
|
6 |
Min. Fuel Consumption |
≤230g/km.h |
|
|
7 |
Max.Torque |
380 N.m / 1400-1600 rpm |
|
|
8 |
Displacement |
4.5L |
|
|
Steering System |
|||
|
1 |
Model of Steering Device |
BZZ5-250 |
|
|
2 |
Steering Angle |
±36 o |
|
|
3 |
Min. turning radius |
6581mm |
|
|
4 |
Pressure of the system |
12Mpa |
|
|
Axle |
|||
|
1 |
Main Transmission Type |
Double Reduction |
|
|
2 |
Final Reducer |
Single Stage Final Reducer |
|
|
3 |
Rated dynamic / static load of front axle |
9 T / 22.5T |
|
|
Torque Converter |
|||
|
1 |
Torque Converter |
Model |
xuzhou |
|
2 |
Cooling type |
Pressure oil circulating |
|
|
Gearbox |
|||
|
1 |
Model |
TLB1-4WD |
|
|
2 |
Type |
Fixed Shaft Power Transmission |
|
|
3 |
Gears |
Two forward, Two reverse gears |
|
|
4 |
Max.Speed |
35Km/h |
|
Optional equipment
|
Cummins Engine (Guo two) |
|
Front loading of the quick change device |
|
Front loading end: triple valve and line |
|
Front loading end matching: flat fork |
|
Front loading: four in one bucket (three valves must beadded) |
|
Front loading end matching: Liuhe one bucket (anothertriple valve must be added) |
|
Front loading: A wood fork (triple valves must be added) |
|
Front loading end fitting: scratch fork (additional triple valves must be added) |
|
Front loading end fitting: snow shovel (additional triple valves must be added) |
|
Front loading end: bulldozplate |
|
Front loading end match: quick change bucket |
|
Front loading end matching: standard bucket |
|
Front loading end match: front buckle (the original bucket for this bucket) |
|
Rear excavation end: quick change device (mechanical /hydraulic) |
|
Rear excavation end: crushing hammer (Jinshan) / (peak) |
Advantages:
1. Compact fuselage, flexible and convenient, energy efficient.
2. Continuous compound action one drag two operation handle, simple and easy to operate.
3. The excavator is designed as a slideway, which has the advantage of folding side digging and sliding freely.
4. Equipped with auxiliary oil circuit, can be upgraded practical auxiliary equipment to achieve a real multi - purpose function.
5. Simple maintenance and low maintenance cost.
