We usually take good care of our tractors and other machinery, but taking care of our work partners in winter is even more of a problem. Here are some ways to keep machinery warm in winter. I hope it will be helpful to you!
After the tractor operation is completed, you should reduce the throttle and wait for a few minutes. After the machine temperature has dropped, turn off the engine and drain the cooling water.full load and high throttle operation.do not suddenly turn off the engine and drain the water immediately to prevent the tractor from suddenly cooling and cracking. when draining the water, turn on all drain switches and make sure it is drained cleanly. It is recommended to consider draining water when the temperature is below 5°.In severe cold seasons, antifreeze should be appropriately added to the cooling water.

Secondly, pay attention to keeping the battery warm and try not to charge it at low temperature to keep the battery in a fully charged state.the tractor should be parked in a warm, wind-sheltered place such as a garage. If the temperature is low in the parking place, the battery can be removed.
Third, cover the engine and other places that need to be kept warm with insulation curtains and insulation cover.
Fourth,In order to ensure the purity of diesel and reduce freezing, the fuel tank can also be cleaned. It is generally required to clean it once every 20 days. When cleaning, you cannot use a brush and can only use gasoline or diesel to clean it.
Fifth, the oil used in winter should be low-temperature special oil with a freezing point that is 5°C-10°C higher than the lowest ambient temperature. Other components should also be chosen for winter use. It is best to comprehensively inspect the tractor before winter.
Except keep tractor warm,Remember to take care of yourself and your family, put on an extra layer of clothes or try drinking more hot water! This warmth will always help you!

(Everyone's equipment will be different, and all operations must first follow the factory manual or operating instructions.)







